How to save electricity in the apartment

The ways to save power in the apartment

Today's electricity savings are extremely relevant.Utilities are quickly valuable, so many families grab their heads when the following reports come.It seems that the computer does not work in vain, the household turns off the light when it leaves the room and the household appliances are rarely used.But the payments only grow every time what to do?All aspects must be examined, and then the recommendations are clear.Consider the main features.

Features of energy saving in the apartment

  1. Household appliances work not only in the usual but also in "sleep" mode.These include water heater, microwave ovens, equipment (video and audio), charger, all kinds of devices, split systems, computers and so on.
  2. If the devices do not work, they are in standby mode.This, in turn, continues to consume electricity.Turn off the tools from the substrate to prevent increases of costs if you do not use them.
  3. Sleeping comprehensive devices consume 10% of electricity from the utilities.If you make all the values, it is simply overpayed.

Use household appliances correctly

Iron

  1. Everything is simple for iron.After turning on the device, start ironing almost immediately, allow to gradually heat the desired signal and perform the function.
  2. Turn off iron 10 minutes before the end of the manipulation.The sole of the appliance remains warm throughout the period, finishing the ironing according to the remaining heat principle.
  3. Try drying the underwear by 95%, providing the remaining 5% iron.If things are overwhelmed, the device needs additional efforts to process and knead all the creases.Accordingly, they spend a lot of electricity.
  4. Denial of old household appliances, with the automatic stop function, prefer modern irons.When heated to a certain temperature, the indicator turns off to save the electricity.
  5. Select the ironing mode, taking into account the type of fabric.If you are working on a flax or cotton, do not manipulation at too low temperatures.It spends more time and electricity and the creases are not completely removed.

Vacuum cleaner

  1. In order to consume the vacuum cleaner electricity according to declared indicators, you should regularly shake the dust and existing filters.
  2. If you neglect this advice, the household appliance will exceed 20-30%above the permissible indicators.The vacuum cleaner will work with less efficiency but more energy consumption.
  3. Such household appliances use most light and turn on when switched off.So try not turn off the vacuum cleaner after processing each room.Pull behind you in a working condition.

Washing machine

  1. This household device accounts for 15% of electricity costs.Examine the manufacturer's recommendations, use all the functions of the washing machine.
  2. Choose not one and a half hours, but the programs are economical and fast washing.Fill the drum tightly, but avoid overload.In the latter case, a household appliance spends 10% more electricity.
  3. Not all things should be washed at 50-60 degrees.Speake programs at lower temperatures and centrifugation.Correctly choose washing technology (very dirty things, easy cleaning and so on).

Divided system (air conditioning)

  1. The room's cooling systems consume a lot of electrical energy and should be used less frequently.If possible, set the maximum energy three times a day and cool the room.
  2. Families with young children should not make too low temperatures, so try to cool the apartment in court.Before turning on the air conditioner, check that the windows, windows and doors are closely closed.Remove possible cracks that give warm air from the street.
  3. Before buying the shared system, measure the room where the air conditioner is installed.It is also important to take into account the number of people in the room.Do not take high or low power equipment.Enter the middle options.
  4. Don't forget the planned air conditioner's planned service.Complete filters, cartridges and fans according to schedule.Fill the special compartment with a liquid regularly while evaporating.

Computer

  1. Nowadays, personal computers are available in almost every house.This is not surprising because the age of technological development leaves society.
  2. The PC consumes a lot of electrical energy, which significantly increases the average utility bill.The brightness of the monitor spends a lot of light.If you do not need a strong indicator, reduce it to an acceptable signal.
  3. If you do not use your computer for 1-2 hours, do not wait until the equipment will automatically turn off.Set a computer to sleep mode or pull it out at all.
  4. If you need to use a scanner, modem or printer with the birth of the service, connect peripheral devices using a network filter.Always turn off the tools when you don't need it.
  5. The new liquid crystalline displays spend less electricity than their predecessors.If possible, go to such monitors or use laptops (30% lower light is consumed).

Refrigerator

  1. Even the child has a basic ability to use the refrigerator.There is nothing complicated in this, but adults make a lot of mistakes during the installation of the household appliance.
  2. For example, it is not advisable to place a refrigerator on the sunny side of the kitchen, near the heaters and radiators, near a gas or electric stove.
  3. If there are heat sources nearby, the refrigerator will start baking from them.The camera, on the other hand, tries to keep the right level.This results in high light costs.
  4. It is also important to follow the kitchen temperature signal.The optimal mode is the 19-21 degree indicator.This temperature allows the refrigerator to operate without unnecessary efforts.
  5. Do not ignore the basic rules for the care of the technique.Perform a defrosting, free the camera from strong pieces of ice.Replace the doors' rubber seals to keep the refrigerator always closed.
  6. Never move the technique to the wall, such a step slows down the airflow and the refrigerator will bake.Do not buy a huge tool if your family needs are not so high.He spends a lot of light and cools the empty space in vain.

Heating equipment

  1. The strongest "cutlery" electricity contains heaters.To reduce the amount of energy consumed, all windows, doors, floor, walls and so further insulate.
  2. Of course, the double glazed windows perfectly separate the heat.But wooden frames pass on most (about 50%).Lay all cracks with painting or regular ribbon, insulate the windows with cotton wool.Similarly, the doors should be closed tightly.
  3. If the central heating contains but the room is still cold, wash the pipes.You can replace batteries with new ones or "build" more than one more.With this result, you will not need to turn on the heaters.
  4. In the event that warmers literally "eat" the family budget, learn how to use other heat sources.Their role may be a towel (connected to hot water) or dried to a gas burner.In the latter case, you should monitor the amount of gas and regularly ventilate the room.

Electricity Spring Tips

How to save electricity in an apartment
  1. Wipe the chandeliers.Keep the incandescent lamps and ceiling in clean condition.If the powder constantly accumulates them, the room illumination will be high.It will include more and more light, increasing costs.Pure chandeliers are much more effective to scatter the light so you can use lower -energy incandescent lamps.
  2. Wash the windows.Complete the windows as often as possible.Clean glasses allow sunlight to penetrate the apartment to get into the natural light.From here, the need for large amounts of current disappears.In addition, the sun warms the room in the cold season.
  3. Combine the illuminating devices.Don't just use the "top" light when you have to work at the table in the distant corner of the room.Combine chandeliers with floor lamps or table lamps.If the upper lamp contains the incandescent lamps of 3-5 lamps, unscrew the excess, leave 2 pieces.
  4. Use modern tools.To date, there are many devices that serve power savings.These include motion sensors (light turns on and automatically turns off), infrared carriers, smooth changes in illumination, digital switches, pulse relay.
  5. Change the bulbs.Traditional incandescent lamps consume 5-8 times larger electricity than fluorescent, compact and LED relatives.Replace all the onions of the house with energy.Such a step will be true as it can save approximately 40% on the accounts a year.
  6. Turn off the "extra" light.Remove the habit to turn off the lamps when you leave the room.He agrees with the household that he has now introduced the savings mode.This does not mean that you have to sit in the dark for hours.There is simply no need to illuminate a room without anyone.This is especially true for children, the younger generation is not worried about the family budget about age.
  7. Boil the water correctly.If you need to heat the stove liquid, pour hot water.Cover the vessels with a lid and fit into the desired signal.In this case, the bottom of the vessels should be in close contact with the burner.As for the kettle, do not fill the whole cavity with water.Boil as much liquid as you need to cook 2-3 mugs of tea.Pour the remains of hot water into a thermos and drink it.

See how to use household appliances.Complete the charging from the socket phones, do the same with a non -working microwave, slow cooker with a coffee machine.Do not install the refrigerator next to the radiators, boil the water into the kettle in small portions.